Assigning Names To The Sources - JVC KD-SX995 Instructions Manual

Assigning names to the sources

You can assign names to station frequencies and
CDs (both in this unit and in the CD changer).
After assigning a name, it will appear on the
display when you select the source.
Sources
Station frequencies Up to 8 characters (up to
30 station frequencies
including both FM and AM)
CDs* Up to 32 characters (up to
40 discs)
* You cannot assign a name to CD Text or an MP3
disc.
1
Select a source you want to assign a
name to.
When you select a source,
the power automatically
comes on.
2
While pressing D (DISP), press and
hold SEL (select) for more than 2
seconds.
Ex.: When you select CD as the source
3
Select a character.
Maximum number
of characters
• See right column for
available characters.
4
Move the cursor to the next (or
previous) character position.
5
Repeat steps 3 and 4 until you
finish entering the name.
6
Finish the procedure while the last
selected character is flashing.
To erase the entered characters
Insert spaces using the same procedure
described above.
Available characters
A B C D E
K L M N O
U V W X Y
4 5 6 7 8
space
Notes:
• When you try to assign a name to the 41st disc,
"NAME FULL" appears on the display. (In this
case, delete unwanted names before assignment.)
• When the CD changer is connected, you can assign
names to CDs in the CD changer. These names can
also be shown on the display if you insert the CDs
in this unit.
F G H I J
P Q R S T
Z 0 1 2 3
9 – <
/ >
29