Rear Panel - Roland A-49 Owner's Manual

Panel Descriptions

Rear Panel

HOLD jack
You can connect a pedal
switch (DP-2, DP-10; avail-
able separately) here and
use it as a hold pedal (p. 32).
EXPRESSION jack
You can connect an expression
pedal (EV-5, EV-7; available
separately) here and use it to
control various parameters and
functions (p. 32).
* Use only the specified expression pedal (EV-5,
EV-7; sold separately). By connecting any other
expression pedals, you risk causing malfunction
and/or damage to the unit.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all
the units before making any connections.
12
USB COMPUTER port
Use a USB cable to connect
the A-49 to your computer.
* Install the driver in your
computer before you make
this connection (p. 13).
MIDI OUT
connector
You can connect
this to the MIDI IN
connector of another
MIDI device so that the
A-49 can transmit MIDI
messages to it.