Changing The A-49 Settings - Roland A-49 Owner's Manual

Changing the A-49 Settings

To change settings for the A-49, you need to be in FUNCTION mode.
Parameter
VELO CURVE
KEY VELO
SN SETTING
[C1] knob
[C2] knob
[ASSIGN] button
[S1] button
[S2] button
HOLD jack
EXPRESSION jack
CTRL DIR
ADV
FACT RESET
34
Factory setting Explanation
When you play the A-49's keyboard, the transmitted
note message will include a velocity value (volume
data) corresponding to the force of your strike.
1-MEDIUM
The VELO CURVE setting lets you choose the curve by
which the velocity value will change.
TOUCH Specifies the velocity value of the keys you play.
Switches the function of the [C2] knob in SuperNATU-
MODE 0
RAL mode.
Cutoff (CC#74)
Resonance
(CC#71)
Aftertouch
Switches
the sound
(decrements
the program
change
Switches the functions assigned to the knobs, buttons,
number)
and jacks.
Switches
the sound
(increments
the program
change
number)
Hold (CC#64)
Expression
(CC#11)
Specifies whether turning the knob toward the right
will transmit successively higher, or successively lower
Positive
values.
direction
The same setting can be made for the D-BEAM
controller, buttons, and pedals.
Specifies whether the A-49 will use the dedicated
driver described in "Driver Installation" (p. 13) (AD-
ADVANCED
VANCED), or the standard driver provided by the
operating system (GENERIC).
Returns all of the A-49's settings to their factory-set
—
state.
Page
p. 35
p. 36
p. 36
p. 37
p. 40
p. 40
p. 41