Table of Contents
Advertisement
11
12
13
14
15
16
Replacing the hard drive kit
Windows XP DVD to replace the hard drive kit.
www.mpccorp.com
Pull the memory module out of the slot.
Hold the new or replacement module at a 30-degree angle
and press it into the empty memory slot. This module is
keyed so it can only be inserted in one direction. If the
module does not fit, make sure that the notch in the
module lines up with the tab in the memory bay.
Replace the memory bay cover, then tighten the cover
screws.
Insert the battery, then turn your convertible notebook
over.
Connect to the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network
cable.
Reconnect all peripheral devices and replace any
PC cards.
Tools
You need a small Phillips screwdriver and the Windows Vista, or
87
Advertisement
Table of Contents
Troubleshooting
