Gateway E-155C Technical Reference Manual page 104

www.mpccorp.com
The text on the display is dim or difficult to read
•
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
•
Change the display settings.
•
Move your convertible notebook away from sources of
electrical interference, such as televisions, unshielded
speakers, microwaves, fluorescent lights, and metal
beams or shelves.
The display has pixels that are always dark or too bright
•
This condition is normal and inherent in the TFT
technology used in active-matrix LCD screens. MPC's
inspection standards keep these to a minimum. If you feel
these pixels are unacceptably numerous or dense on your
display, contact MPC Customer Care to identify whether
a repair or replacement is justified based on the number
of pixels affected.
The display is blank
•
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
•
Make sure the convertible notebook is not in Sleep or
Hibernate mode. Press the power button.
•
The convertible notebook may be sending its display to
an external monitor or projector. Press F
times to toggle through the LCD panel, an external
monitor or projector, or both.
"Adjusting brightness" on page
"Adjusting brightness" on page
39.
39.
+ F4 several
N
97