Appendix I - Specifications - Pride Mobility Pathrider 130 XL Owner's Manual

A P P E N D I X I - S P E C I F I C A T I O N S
Model Number
Obstacle Climbing Ability
2
Overall Length
2
Overall Width
Total Weight Without Batteries
Heaviest Piece When Disassembled
2
Turning Radius
1
Speed (Maximum)
1,4
Range Per Charge
2
Ground Clearance
Weight Capacity
Standard Seating
Drive System
Dual Braking System
Tyres
3
Battery Requirements
Battery Charger
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition and tyre condition. This
specification can be subject to a variance of (+ or -) 10%.
2
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance
of (+ or - ) 3 %.
3
AGM or Gel-Cell type required. See IV. "Batteries and Charging."
4
Tested in accordance with ASNI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical
calculation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.
NOTE: This product conforms to all applicable ANSI/RESNA testing requirements and ISO 7176
series EN12184 standards. All specifications subject to change without notice.
Pathrider 130 XL
SC713
5 cm (2 in.)
136 cm (53.54 in.)
63.65 cm (25 in.)
2 65.28 kg (143 lbs.)
Rear section: 34 kg (74.95 lbs.)
170 cm (67 in.)
12 km/h (7.45 mph)
Up to 34 km (21.13 miles)
9.69 cm (3.81 in.)
181.43 kg (400 lbs.)
Type: KAB
Weight: 23,13 kg (51 lbs.)
Material: Black Vinyl
Dimensions: 49.53 cm (19.5 in.) overall width
Rear-wheel drive, sealed transaxle, 24-volt DC motor
Regenerative and electromechanical
Type: Solid
Front and rear: 33 cm (13 in.)
Two 12-volt, deep-cycle
Size: 55Ah
Battery Weight: 17.16 kg (37.83 lbs) each
5-amp, off-board
www.pridemobility.com
44.45 cm (17.5 in.) effective depth
42