Status Led; Horn Buttons; Turn Indicator Buttons; Lights Switch - Pride Mobility Pathrider 130 XL Owner's Manual

Status LED

The status LED alerts you to electrical problems that may occur with the scooter. The LED remains con-
stantly lit while your scooter is on. If your scooter develops an electrical problem, the status LED will flash
a code. See VIII. "Basic Troubleshooting" for flash codes.

Horn Buttons

These buttons activate a warning horn. Your scooter must be powered up for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.

Turn Indicator Buttons

Use these buttons to turn on the left and right turn indicator (amber) lights.
Push the left button to activate the left turn indicator light. The turn indicator LED located in the battery
condition meter will flash.
Push the right button to activate the right turn indicator light. The turn indicator LED located in the
battery condition meter will flash.
The turn indicators are timed to shut off automatically.

Lights Switch

This switch controls your scooter's lighting system.
Toggle the switch forward to turn on the lighting system.
Toggle the switch rearward to turn off the lighting system.
WARNING! Scooter users are required to use their lights when visibility is restricted—day
or night.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
Toggle the hazard lights switch forward to turn on the flashers.
Toggle the hazard lights switch rearward to turn off the flashers.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maxi-
mum speed you preset with the speed adjustment dial.
To Move Forward, use either of the following:
Use your left thumb to push the left side of the throttle control lever.
Use your right hand fingers to pull back on the right side of the throttle control lever.
To Move Rearward, use either of the following:
Use your right thumb to push the right side of the throttle control lever.
Use your left hand fingers to pull back on the left side of the throttle control lever.
Release the throttle control lever and allow your scooter to come to a complete stop before engaging the
other side of the lever. When the throttle control lever is completely released, it automatically returns to
the centre "stop" position and engages your scooter's brakes.
Pathrider 130 XL
I I I . Y O U R S C O O T E R
www.pridemobility.com
21