Table of Contents
Advertisement
This field specifies the first address in the pool to be assigned by the DHCP server in your
local network. Default setting is from 2.
5. End IP
This filed specifies the last address in the pool to be assigned by the DHCP server in your
local network. The default setting is end of 253.
6. Advanced
Enable the advance setting and then setup the Router, DNS and WINS value.
7. Router
This field indicates the IP address of Router to provide to clients that request IP Address
from DHCP Server, the default setting is the same with LAN IP address.
8. DNS
This field indicates the IP address of DNS to provide to clients that request IP Address
from DHCP Server, the default setting is the same with LAN IP address.
9. WINS
The Windows Internet Naming Service manages interaction of each PC with the Internet.
If you use a WINS server, enter IP Address of server here.
10. Apply & Cancel
Click on Apply button to continue. Click on Cancel button to clean the setting on this
page.
Besides, the DHCP information will be listed below above setting in DHCP Clients, including
IP Address and MAC address.
3.3.3
Wireless
The WE-1120 enables fastest 54 Mbps IEEE802.11g wireless transmissions and keeps
compatibility with existing IEEE 802.11b devices. The WE-1120 complies with IEEE 802.11b
standard. Please select Wireless under the Main menu. Follow the instructions to enter the
Wireless setting page to configure the settings you want.
54
Advertisement
Table of Contents
