3.6.6
Time
The System time is the time used by the WE-1120 for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP server
is set, you will only need to set the time zone. If you manually set the time, you may also set
Daylight Saving dates and the system time will automatically adjust on those dates.
1. Local Time: Router default time.
2. Default NTP Server: Select the NTP Server from the drop-down list.
3. Time Zone: Select your time zone location from the drop-down list.
4. Daylight saving time: If you are in daylight saving time area, please "Enable" this
item.
5. Set the Time: Select this item to setup time by manual, select the date and time from
106