Table of Contents
Advertisement
3.2.2
LAN Setup
If you are using the WE-1120 with multiple PCs on your LAN, you must connect the LAN via
the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to
each device residing on your LAN. The LAN IP address identifies the router as a node on
your network; that is, its IP address must be in the same subnet as the PCs on your LAN. The
default LAN IP for the Internet Security Router is 192.168.1.1.
For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between 1
and 254 that is not used by another device.) Please don't change the default LAN IP settings
at this section until you have completed the reset of the configurations and confirm that your
Internet connection is working. And the DHCP Server will automatically allocate an unused IP
address from the IP address pool to the requesting computer. You must specify the starting
and ending address of the IP address pool.
Click on "Next" button to proceed to the next setting.
The setup of pre-assigned Gateway
IP Address is suggested for good to
use.
Requested to be as complied as LAN IP.
34
Advertisement
Table of Contents
