Build Network Connection ....................10 2.1.1 Router Mode ......................... 10 2.1.2 AP Mode ........................11 2.1.3 Wi-Fi AP Mode ......................11 Connecting SAPIDO GR-1142 ....................11 Network setup......................... 12 2.3.1 Windows 2000 ....................... 13 2.3.2 Windows XP........................14 2.3.3 Windows Vista / Windows 7..................15 Router IP Address Lookup ....................
Page 3
Firmware Upgrade ....................... 73 6.3.4 Profile Save........................73 6.3.5 Remote Manager ......................76 6.3.6 Time Zone Setting......................77 6.3.7 UPnP Setting ......................... 77 6.3.8 VPN Passthrough Setting..................... 78 6.3.9 Language Setting ......................79 Log & Status ........................... 79 User Manual v1.0.0 http://www.sapido.com.tw/...
Page 4
Event Log ........................81 6.5 Logout 82 Chapter 7 Samba Server ......................... 83 How to use SAPIDO GR-1142 as a Samba server ............... 83 Air play ........................... 83 Printer Server ..........................85 To add an LPR port ..........................85 Chapter 8 DDNS Service Application ......................
IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cm between the radiator & your body. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 6
"Council Directive on the Approximation of the Laws of the Member Sates relating to Electromagnetic Compatibility" (89/336/EEC; 92/31/EEC; 93/68/EEC). The Declaration of Conformity can be found at the Sapido regional website. www.sapidotech.de CE Information of Disposal The electric and electronic equipment or unit which is labeled with crossed-out wheeled bin may not be disposed of with household waste.
Server Router / Server AP / WiFi Server AP mode switch Slide Switch Reboot button / Reset button Button WPS button AC100V ~ 240V Power supply DC5V/1.5A input for mini-USB port 91mm(L) x 78mm(W) x 30mm(H) Dimensions Device Weight User Manual v1.0.0 http://www.sapido.com.tw/...
Transmitting Data green: Transmitting Data Operation OK WIRELESS & WPS Orange: WPS enabled The Rear DC 5V power in Power DC Jack Press for back to factory default Reset Button For 3G/USB printer、webcam、disk、speaker USB Port User Manual v1.0.0 http://www.sapido.com.tw/...
Page 9
RJ-45 Ethernet 10/100/100 Ports Ethernet Port RJ-45 Ethernet 10/100/100 Port Ethernet Port (WAN) User Manual v1.0.0 http://www.sapido.com.tw/...
Chapter 2 System and Network Setup The SAPIDO GR-1142 is an easy to setup and wireless device for various application and environment, especially for large installs such as hotels, offices space, warehouses, hot-spots and more. To begin with SAPIDO GR-1142, you must have the following minimum system requirements.
Wi-Fi AP Mode Switch to WiFi AP Mode when you connect to the internet wirelessly through PC and wireless device without wireless LAN function equipped. Connecting SAPIDO GR-1142 Prepare the followings before the connection: PC or Notebook for setup ...
Make sure you are under “Router Mode”. Connect SAPIDO GR-1142 to xDSL/ Cable modem with the Ethernet cable, WAN to LAN. Turn on your Computer. Network setup After the network connection is built, the next step is setup the router with proper network parameters, so it can work properly in your network environment.
Double-click Network and Dial-up Connections icon, double click Local Area Connection, and Local Area Connection Properties window will appear. Select “Internet Protocol (TCP/IP)”, then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. User Manual v1.0.0 http://www.sapido.com.tw/...
Double-click Network and Internet Connections icon, click Network Connections, then double-click Local Area Connection, Local Area Connection Status window will appear, and then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, then click “OK”. User Manual v1.0.0 http://www.sapido.com.tw/...
Connections. Right-click Local Area Network, then select “Properties”. Local Area Connection Properties window will appear, select “Internet Protocol Version 4 (TCP / IPv4)”, and then click “Properties”. Select “Obtain an IP address automatically” and “Obtain DNS server address User Manual v1.0.0 http://www.sapido.com.tw/...
“OK”. Router IP Address Lookup After the IP address setup was completed, please clicks “start” → “run” at the bottom-lower corner of your desktop: Input “cmd”, and then click “OK”. User Manual v1.0.0 http://www.sapido.com.tw/...
IP address of the wireless router in address bar, and the following message should be shown. Please click “admin” to login the SAPIDO GR-1142. Enter the User name and Password in to the blank and then Click Login. The default values for User Name and Password are admin (all in lowercase letters).
Page 18
User Manual v1.0.0 http://www.sapido.com.tw/...
Web login password: admin Plug and Play The SAPIDO GR-1142 supports four types of Internet connection method: 3G modem card, wire or wireless connection via xDSL/Cable modem. Just connect the 3G modem card or Ethernet cable to SAPIDO GR-1142, the router will recognize it automatically.
Page 20
2. Google Android Phone: please turn on "USB modem mode” when connecting router. 3. Window Mobile Phone: please enable “USB to PC” function. User Manual v1.0.0 http://www.sapido.com.tw/...
Enter the User name and Password into the blank and then click Login. The default values for User Name and Password are admin (all in lowercase letters). 3.2.1 One button setup This page is used to configure all of the server router function. User Manual v1.0.0 http://www.sapido.com.tw/...
Time Zone Select Set a new password Change Password There are several different WAN interface,Ethernet port、3.5G usb WAN Type Setup dongle、wireless GR-1142 support 2.4GHz band Wireless Setup Input DNS information which is provided by your ISP Encryption 3.2.2 Parental Control 3.2.2.1...
Current Filter Table Click Delete Selected will delete the selected item. Click Delete All Delete Selected & Delete will delete all items in this table. Reset You can click Reset to cancel. 3.2.2.3 Schedule Wireless available schedule User Manual v1.0.0 http://www.sapido.com.tw/...
Page 25
Connection port view webcam View live webcam video watch Record Setup Recording interval How often take an image Video Storage Providing native USB storage device and a remote FTP server for storing images taken image format User Manual v1.0.0 http://www.sapido.com.tw/...
Note:a JPG file size is about 13KB, and AVI file size is about 45127KB (when maximum recording frames is 1000), file size may vary due to webcam models have different sizes 3.2.4 AirCloud Storage 3.2.4.1 FTP server User Manual v1.0.0 http://www.sapido.com.tw/...
The WAN access type is depended on the service that you contract with the provider. The SAPIDO GR-1142 provides five selections for the WAN access type, Static IP, DHCP Client, PPPoE, PPTP and L2TP. Check with your ISP if you don’t know the WAN type.
Select WAN under the IP Config menu, and choose Ethernet Port for the WAN Interface. Its associated setting will show up. Item Description Select “Static IP” WAN Access Type Enter the IP address which is provided by your ISP. IP Address Please enter the Subnet Mask address Subnet Mask User Manual v1.0.0 http://www.sapido.com.tw/...
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. 3.2.5.2 DHCP Client User Manual v1.0.0 http://www.sapido.com.tw/...
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. 3.2.5.3 PPPoE User Manual v1.0.0 http://www.sapido.com.tw/...
Page 31
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
3.2.5.4 PPTP Item Description Select "PPTP" WAN Access Type Input your server IP address provided by your ISP. If you don’t Server IP Address know, please check with your ISP. User Manual v1.0.0 http://www.sapido.com.tw/...
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. 3.2.5.5 L2TP User Manual v1.0.0 http://www.sapido.com.tw/...
This option is to enable Web Server Access function on WAN. Enable Web Server Access on WAN 3.2.6 WAN Interface- 3G USB dongle Select WAN under the IP Config menu, and choose 3G usb dongle for the WAN Interface. Its associated setting will show as below. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 35
MAC address registered to the provider to "Clone MAC Address" If your 3G USB adapter is a pay-as-you-go plan base, select “Dial Always / Dial on demand on demand” and disconnect the connection when you don't use the User Manual v1.0.0 http://www.sapido.com.tw/...
Apply Change Rebooting this product is started. Please wait for a while. 3.2.7 WAN Interface- Wireless Select WAN under the IP Config menu, and choose wireless for the WAN Interface. Its associated setting will show as below. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 37
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
Enter the User name and Password in to the blank and then Click Login. The default values for User Name and Password are admin (all in lowercase letters). Select LAN under the IP Config menu User Manual v1.0.0 http://www.sapido.com.tw/...
Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. WiFi AP Mode- Using as a Network Converter Make sure to shift the mode into WiFi AP Mode. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 40
The default gateway is and for User Name and Password are admin (all in lowercase letters). Click Login to enter. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 41
MAC address registered to the provider to "Clone MAC Address" Click on Apply Change to save the setting date, or you may click Apply Change & Reset on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
Chapter 4 Wireless Setup Wireless Setup There are two ways to setup wireless LAN with SAPIDO GR-1142. You can use either way to setup Wireless LAN. 4.1.1 Setup Wireless LAN by WPS button You can setup wireless LAN easily by using the WPS button if both WLAN router and the WLAN adapter (client) are WPS supported.
Page 43
(3) Open a web browser to check the internet connection. (4) Setup without WPS button if you wireless adapter has only virtual WPS function. (5) Open Wireless adapter utility. (6) Press the WPS button (A) from SAPIDO GR-1142 and wait for Wireless/WPS LED light (B) changed into orange.
Page 44
(8) Confirm the information form the Utility (9) After completes the WPS setup. Please confirm that it can be connected to the Internet. Note: The setup image might be some differences when using other branded Adapter. User Manual v1.0.0 http://www.sapido.com.tw/...
4.1.2 Wireless Basic Setup from Web GUI The Wireless Basic Settings include Band, Mode, SSID, Channel Number and other wireless settings. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 46
Enable this function will control your router use lower or upper Control Sideband channel. Please select the channel; it has Auto, 1, 2~11 or 13 options. Channel Number User may choose to enable Broadcast SSID or not. Broadband SSID User Manual v1.0.0 http://www.sapido.com.tw/...
4.1.2.1 Multiple APs The SAPIDO GR-1142 can register up to 4 SSIDs (wireless LAN group). It can be used as if there are multiple wireless LAN access points with one product. Each SSID could be set with different data rate, WMM and access type.
Example: When users enable the Universal Repeater to connect to the upper level device, please fill in the upper level devices channel and SSID. Click on Apply Changes to save the settings. (Please disable the DHCP service first) User Manual v1.0.0 http://www.sapido.com.tw/...
Users can use the Network Configuration page to check the information about “Wireless Repeater Interface Configuration”. Wireless Security Setup User Manual v1.0.0 http://www.sapido.com.tw/...
Page 50
There are five Encryption types supported: “None”, “WEP”, “WPA (TKIP)”, ”WPA2(AES)”, and “WPA2 Mixed”. Enabling WEP can protect your data from eavesdroppers. If you do not need this feature, select “None” to skip the following setting. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 51
It is a safety system by using authentication to protect your wireless network. Encryption- WPA (WPA, WPA2, and WPA2 Mixed), WPA Authentication Mode (1) Enterprise (RADIUS): Please fill in the RADIUS server Port, IP Address, and User Manual v1.0.0 http://www.sapido.com.tw/...
‘Reset’ to reset all the input data. Wireless Access Control Access Control allows user to block or allow wireless clients to access this router. Users can select the access control mode, then add a new MAC address with a simple comment and User Manual v1.0.0 http://www.sapido.com.tw/...
Page 53
(1) Please select Deny Listed in Wireless Access Control Mode first, and then fill in the MAC address what you plan to block in the MAC Address field. Click Apply Changes to save the setting. (2) The MAC address what you set will be displayed on the Current Access Control List. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 54
(3) The wireless client will be denied by the wireless router. User Manual v1.0.0 http://www.sapido.com.tw/...
Chapter 5 Router Mode Security Setup This section contains configurations for the SAPIDO GR-1142’s advanced functions such as: virtual server, DMZ, and Firewall to provide your network under a security environment. 5.1.1 Virtual Server The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of service port numbers (from the WAN port) to a particular LAN IP address.
The port forwarding feature is more secure because it only opens the ports required by that application. Item Description It will enable the DMZ service if you select it. Enable DMZ User Manual v1.0.0 http://www.sapido.com.tw/...
Kbps or check the Automatic uplink speed. Manual Uplink Speed Set the downlink speed by manual to assign the download or upload Automatic downlink bandwidth by the unit of Kbps or check the Automatic downlink speed / Manual Downlink speed. Speed User Manual v1.0.0 http://www.sapido.com.tw/...
Please select the protocol type of the port. Protocol You can add comments for this regulation. Comment Click on Apply Changes to save the setting data. Or you may click Apply Changes & Reset on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
You can click Reset to cancel. Port 80 has been blocked as the following illustrate. IP: 192.168.1.x Port: 80-80 5.2.3 IP Filtering When enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP addresses. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 60
It will display all ports that are filtering now. Current Filter Table Click Delete Selected will delete the selected item. Click Delete All Delete Selected & Delete will delete all items in this table. Reset You can click Reset to cancel. User Manual v1.0.0 http://www.sapido.com.tw/...
Choose correct Service Provider from drop-down list, here including Service Provider DynDNS, TZO, ChangeIP, Eurodns, OVH, NO-IP, ODS, Regfish embedded in SAPIDO GR-1142. User name is used as an identity to login Dynamic-DNS service. User Name/Email User Manual v1.0.0...
Click on Apply Changes to save the setting data. Or you may click on Apply Changes & Reset Reset to clear all the input data. Wireless Advanced Setup In Advanced Settings page, more 802.11 related parameters are tunable. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 63
Users can get better wireless transmission efficiency when they Short GI enable this function. Users can adjust RF output power to get the best wireless network RF Output Power environment. Users can choose from 100%, 70%, 50%, 35%, and User Manual v1.0.0 http://www.sapido.com.tw/...
To accomplish this, all wireless routers should be set to the same channel and the MAC address of other AP / Routers should be entered in the table. The WDS explanation is as the following picture. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 65
Please check the MAC address and Channel number from WDS Router A. Set the connection mode to “AP+WDS” from “Wireless Basic Setting”, and then select the channel number (in this example is "6”). Click Apply Changes to save the setting. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 66
Enable WDS function from the page – “WDS Setting”, and then fill in the MAC address of Router B. Click Apply Changes to save the setting data. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 67
The WDS AP List will show the WDS device MAC address after reboot. Move on the setup to WDS Router B User Manual v1.0.0 http://www.sapido.com.tw/...
Access Point in a minute without any hassle. SAPIDO GR-1142 could support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function.
Page 69
(1). Get the WPS PIN number from wireless card and write it down. (2). Fill in the PIN number from the wireless card in Client PIN Number field, and then click “Start PIN”. (3). Click PIN from Adapter Utility to complete the WPS process with the wireless router. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 70
Start PBC: (1). Press the WPS button (A) from SAPIDO GR-1142 and wait for Wireless/WPS LED light (B) changed into orange. (2). Press the WPS button (C) from the adapter until the setup window shows up. (3). Open a web browser to check the internet connection.
Motherboard that supports WOL, as well as a Network Controller (NIC) supporting this function. Most of the newer Motherboard (circa 2002 and On), have an On Board NIC that supports WOL. Otherwise you need to install a PCI NIC that is WOL capable. User Manual v1.0.0 http://www.sapido.com.tw/...
Users can set or change user name and password used for accessing the web management interface in this section. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. User Manual v1.0.0 http://www.sapido.com.tw/...
6.3.4 Profile Save Users can create a backup file that contains current router settings. This backup file can be used to restore router settings. This is especially useful in the event you need to reset the User Manual v1.0.0 http://www.sapido.com.tw/...
Page 74
Save Configuration (1). Click Save (2). Please click “Save” to save the configuration to your computer. (3). Select the location which you want to save file, then click Save. Load configuration file User Manual v1.0.0 http://www.sapido.com.tw/...
Page 75
(1). Click Choose File (2). Select configuration file then click Open (3). Click Upload to upload configuration file to SAPIDO GR-1142. (4). After 90 seconds, SAPIDO GR-1142 will reboot automatically. Reload factory default setting (1). Please click Reset User Manual v1.0.0...
(2). Please click OK to start reload factory default setting to SAPIDO GR-1142. (3). After 90 seconds, SAPIDO GR-1142 will reboot automatically. 6.3.5 Remote Manager Item Description HTTP Connection Port Users can access GUI by this port,default is 80 Allow user access GUI from WAN side...
(data sharing, communications, and entertainment) and in corporate environments for simplified installation of computer components. SAPIDO GR-1142 supports UPnP function, and can cooperate with other UPnP devices. When you activate UPnP, please click My Network Places. Users will see an Internet Gateway Device icon.
PPTP Pass-through is enabled by default. To disable PPTP Pass-through, select Disable. To allow the L2TP network traffic to be forwarded to its destination L2TP Pass-through without the network address translation tasks. User Manual v1.0.0 http://www.sapido.com.tw/...
6.3.9 Language Setting The SAPIDO GR-1142 provide 12 language for Web GUI. You can select the language interface from the dropdown list and by following steps. When you see the screen message change to the selected language, the setup is completed.
6.4.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP …information. User Manual v1.0.0 http://www.sapido.com.tw/...
Apply Changes & Refresh & to renew the system time, or on Clear to clear all the record. Clear * The following figure is an example when users click Apply Changes to record the event log. User Manual v1.0.0 http://www.sapido.com.tw/...
6.5 Logout This function logs out the user. 6.6 App Hyperlinks provide users quick and convenient for users download with a third-party software on the machine User Manual v1.0.0 http://www.sapido.com.tw/...
Chapter 7 Samba Server The SAPIDO GR-1142 is able to act as a Samba server to share the file on USB storage in local network. How to use SAPIDO GR-1142 as a Samba server Plug in the USB hard disk/Flash.
Page 84
Execute ipod User Manual v1.0.0 http://www.sapido.com.tw/...
The Line Printer Remote (LPR) port is best suited to servers that need to communicate with host computers (such as UNIX or VAX computers) by way of RFC 1179. A network-connected printer must have a card that supports LPD for LPR printing to work properly. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 86
You can also add ports using the Print Server Properties dialog box. For more information, click Related Topics. Please refer DUT/Network Config page to get name of printer User Manual v1.0.0 http://www.sapido.com.tw/...
If you don’t have a DDNS account, please follow the steps to complete your DDNS with Dynamic IP settings. http://www.dyndns.com/ First access the Internet and fill into the address field of your web browser, then click Create Account. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 88
Fill in the form as required, and then click on Create Account button. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 89
When you got this account created message, close it, and check your mailbox. You would get a mail from DynDNS website. Click on the indicated address within your mail to confirm. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 90
Click on login. Click My Services after logging in. Click Add New Hostname. Put in your favorite hostname and service type, and then click Create Host after finished. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 91
Your hostname has been created when you see the following page. User Manual v1.0.0 http://www.sapido.com.tw/...
IP address and LAN cable, the changes cannot be made, or password is lost. A: In case SAPIDO GR-1142 is inaccessible; you can try to restore its factory default settings. Please press the “Reset” button and keep it pressed for over 7 seconds and the light of STATUS will vanish.
A: There are two ways to know. Way 1: Check with your Internet Service Provider. Way 2: Check the setting screen of SAPIDO GR-1142. Click on Status & Log item to select Network Configuration on the Main Menu. WAN IP is shown on the WAN interface.
Page 94
5. Select Direct connection to the Internet and click on OK button. 6. Click on OK button. Web page hangs, corrupt downloads, or nothing but junk characters is being displayed on the screen. What do I need to do? User Manual v1.0.0 http://www.sapido.com.tw/...
Q: Why does SAPIDO GR-1142’s setup page shut down unexpectedly? A: If one of the pages appears incompletely in SAPIDO GR-1142 ’s setup pages, please click on Logout item on the Main Menu before shutting it down. Don’t keep it working.
IP information to the NIC. As a result, I was able to connect to the network, but could not browse the web. The point is, don't assume anything. Verify for yourself that all of the required settings are being received by the workstation. User Manual v1.0.0 http://www.sapido.com.tw/...
Page 97
Any “noisy” devices should be shielded or relocated. RF Shielding: Your environment may tend to block transmission between the wireless stations. This will mean high access speed is only possible when close to the Access Point. User Manual v1.0.0 http://www.sapido.com.tw/...
A: The default WEP of WinXP is Authentication Open System - WEP, but the WEP of SAPIDO GR-1142 is only for Shared Key - WEP, it caused both sides couldn’t communicate. Please select the WEP of WinXP from Authentication Open System to Pre-shared Key - WEP, and then the WEP wireless interface between WinXP and SAPIDO GR-1142 would be communicated.
In this situation, we suggest to disable DHCP server in router and configure your PC manually. USB Device Q: How many USB devices can be connected to the Product? A: SAPIDO GR-1142 has 2 USB ports. User Manual v1.0.0 http://www.sapido.com.tw/...
FireFox ver. 2.0.0.11 and the following related versions.3. Safari ver. 3.04 and the following related versions. 10.3 Communications Regulation Information Should any consumers need to learn more information, services and supports, please contact the supplier of your product directly. User Manual v1.0.0 http://www.sapido.com.tw/...