Lan Setup - Sapido We-1120 BT Ultimate User Manual

4.2.1

LAN Setup

If you are using the WE-1120 with multiple PCs on your LAN, you must connect the LAN via
the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to
each device residing on your LAN. The LAN IP address identifies the router as a node on
your network; that is, its IP address must be in the same subnet as the PCs on your LAN.
The default LAN IP for the Internet Security Router is 192.168.1.254.
For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between 1
and 253 that is not used by another device.) Please don't change the default LAN IP
settings at this section until after you have completed the reset of the configurations and
confirm that your Internet connection is working. And the DHCP Server will automatically
allocate an unused IP address from the IP address pool to the requesting computer; which
means you must specify the starting and ending address of the IP address pool, and the
DHCP Router's address must be identical to the LAN IP's IP Address.
Click on "Next" button to proceed to the next setting.
128