Table of Contents
Advertisement
Site Survey
Please select "Site Survey" under the "IP Config" menu.
1.
Link Mode
Please select "Infrastructure" or "Ad_hoc", to enable wireless.
2.
RTS Threshold
This value should remain at its default setting of 2347. The range is 0-2347
bytes. Should you encounter inconsistent data flow, only minor modifications are
recommended. If a network packet is smaller than the preset RTS threshold size,
the RTS/CTS mechanism will not be enabled. The AP sends Request to Send
(RTS) frames to a particular receiving station and negotiates the sending of a
data frame. After receiving an RTS, the wireless station responds with a Clear to
Send (CTS) frame to acknowledge the right to begin transmission.
207
Advertisement
Table of Contents
