Table of Contents
Advertisement
4.2.2
Wireless Setup
WE-1120 is based on industry standards to provide compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly
adhering to the IEEE standard, the router will allow you to access the data you want, when
and where you want it. You will be able to enjoy the freedom that wireless networking
delivers.
For selecting configuration utility in AP/Bridge wireless connection, the Channel 6 is the
default channel; all devices on the network must be set to the same channel to
communication on the network. The default TxPreamble setting is Long. Authentication is
the security function to prevent the connection requests from unauthorized wireless clients.
As the Encryption Type, select WEP or WPA can protect your data from eavesdroppers, if
you do not need the encryption, select "NONE" to skip the following setting.
After checking each above blank and choose the suitable item as your demand, click on
"Next" button to proceed to next setting.
Notice: If use AP/Bridge to do wireless connection to router, here suggest disable the
DHCP setup in LAN Setup, please refer to "4.2.1 LAN".
Select AP/Bridge or WDS
You can use the default ESSID
unless more than one AP/Router is
deployed in the same area. And it
will show when searching the
wireless signal
129
Advertisement
Table of Contents
