Related Manuals for CYBEX Bravo Lift
Summary of Contents for CYBEX Bravo Lift
- Page 1 Cybex Bravo Lift Owner’s Manual Strength Systems Part Number 18030-999-4 A www.cybexintl.com...
-
Page 2: Table Of Contents
Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. -
Page 3: Safety Guidelines And Practices
It is imperative the floor be level. Cybex recommends that all fitness equipment be used in a supervised area. It is recommended that the equipment be located in an access controlled area. Control is the responsibility of the owner. The extent of control is at the discretion of the owner. - Page 4 Cybex 18030 Bravo Lift Owner’s Manual Use the selectorized and plate loaded machines as shown on placards. DO NOT modify the • machine. Never pin the weights in an elevated position. DO NOT use the machine if found in this condition.
- Page 5 Death or serious injury will occur if the following requirements are not met: Cybex is not able to anchor the equipment due to local building codes. The owner is responsible for the actual anchoring of equipment. Consult with a professional contractor.
-
Page 6: Securing Equipment
A minimum pull out force of 220 lbs/100 kgs is required for each anchor position. PROPER USAGE Use equipment only as described in the manual or on the placards located on each machine. Failing to follow proper instructions may result in injury. STANDARD COMPLIANCE Cybex products meets applicable ASTM and EN Standards. -
Page 7: Regular Maintenance Activities
Cybex 18030 Bravo Lift Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal and safe operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. -
Page 8: Warnings And Cautions
Cybex 18030 Bravo Lift Owner’s Manual Warnings and Cautions Warning decals indicate a potentially hazardous situation that could result in death or serious injury if the precautions are not observed. Caution decals indicate a potentially hazardous situation that could result in minor or moderate injury if the precautions are not observed. -
Page 9: Label Placement
Cybex 18030 Bravo Lift Owner’s Manual Label Placement 4605-381-X... -
Page 10: Assembly
Cybex 18030 Bravo Lift Owner’s Manual Assembly Machine Specifications Total Weight and Size: Weight Machine Dimensions at Rest Machine Dimensions at Use 747 Lbs 46.69” W x 71.39” L x 83.63” H Same 339 Kg 118.62 cm W x 181.330 cm L x 212.43 H... -
Page 11: Assembly Procedure
Cybex 18030 Bravo Lift Owner’s Manual 17000-320 12090-322 Assembly Procedure Two people will be required for this procedure. Read and understand all instructions thoroughly before assembling this unit. Check all items Ø .406 3 PLCS carefully. If there is damage, see the Customer Service section of this manual for proper procedure to SPLIT B 20.85... - Page 12 Cybex 18030 Bravo Lift Owner’s Manual Then Two people will be required for this procedure 1. Remove the four shipping cones using a 3/4” socket or wrench. 2. Attach foot pads to each foot of frame. 3. Remove front panel from machine.
- Page 13 Cybex 18030 Bravo Lift Owner’s Manual Then 1. Move pulley and cable connection out of the way. 2. Remove guide rod caps. Guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide spring loaded guide rod cap down guide rod until cap is clear of frame.
- Page 14 Securely anchor machine to the floor To maximize stability, equipment must be secured to a solid level surface. Cybex is not responsible for the actual anchoring of equipment. Consult with a professional • contractor. Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
- Page 15 Cybex 18030 Bravo Lift Owner’s Manual Install individual weight plates one at at time 1. Position each weight plate so wide edges of bushings face upward and narrow edges of bushings face downward. Wide bushing The narrow bushing edge edge faces upward must face downward.
-
Page 16: Exercise
Cybex 18030 Bravo Lift Owner’s Manual Exercise Intended Use The intended use of this machine is to aid or improve general physical fitness and exercise for commercial use. Instructions Read and understand all instructions and warnings prior to using this machine in the Safety section of the Owner’s Manual. - Page 17 Cybex 18030 Bravo Lift Owner’s Manual LUNGE LUNGE STIFF-LEGGED DEADLIFT LUNGE STIFF-LEGGED DEADLIFT STIFF-LEGGED DEADLIFT Motions Developed Motions Developed Hip Extension Hip Extension, Knee Extension Muscles Used Muscles Used Gluteus Maximus, Hamstrings Quadriceps, Gluteus Maximus, Hamstrings...
-
Page 18: Maintenance
Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. Cybex is not responsible for performing regular inspection and maintenance actions for your machines. - Page 19 Cybex 18030 Bravo Lift Owner’s Manual Clean Upholstery Then 1. Prepare a solution of 10% household liquid soap and warm water. 2. Apply with a soft damp cloth. Light Soiling 3. If necessary, apply a solution of liquid cleanser with a soft bristle brush.
- Page 20 Cybex 18030 Bravo Lift Owner’s Manual Clean Chrome Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral cleaners with a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or damage the equipment.
-
Page 21: Weekly Procedures
Cybex 18030 Bravo Lift Owner’s Manual Weekly Procedures Inspect All Nuts and Bolts Tighten all loose nuts and bolts as required. WARNING: Serious injury or death may result if the following precautions are not followed. Replace all worn cables and belts. Worn cables and belts can fail if not replaced. - Page 22 Cybex 18030 Bravo Lift Owner’s Manual Belts Condition of Belt 3D View 3D or Side View Peeling of the belt’s skin. Wave in belt Replace belt if any Examine edge of belt (both sides). section is over 1/32” Replace belt if any section is (.03) narrower than the...
-
Page 23: Yearly Procedures
Cybex 18030 Bravo Lift Owner’s Manual CAUTION: Personal injury or property damage may occur if the following precautions are not followed. Do not use if less than 1/8” of material remains to the edge. Replace all worn handles immediately. Failure to replace worn handles can result in injury or property damage. -
Page 24: Cable Adjustment
Cybex 18030 Bravo Lift Owner’s Manual Cable Adjustment Tools Required 9/16” Wrench (2) Four types of cable tension adjustment are used on Cybex Strength Systems: Cable Description Diagram Adjustment This type of adjustment uses a jam nut and a tension adjustment nut at... -
Page 25: Belt Adjustment
Cybex 18030 Bravo Lift Owner’s Manual Belt Adjustment Tools Required 7/32” Wrench • Torque wrench (lbs-in) • Belt Adjustment Action 1. Using a 7/32” Allen wrench loose set screws. 2. Pull belt tight. 3. Secure belt in place with set screws. -
Page 26: Customer Service
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. email address internationaltechhelp@cybexintl.com Find information on the web at www.cybexintl.com. -
Page 27: Ordering Parts
To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). The following information located on the serial number decal will assist our Cybex representatives in serving you. Unit Serial Number, Product Name and Model Number •... -
Page 28: Return Material Authorization (Rma)
Provide the model and serial number of your Cybex equipment. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you a RMA number and will send you an ARS label. - Page 30 10 Trotter Drive Medway, MA 02053 508-533-4300 FAX 508-533-5183 • • www.cybexintl.com • techhelp@cybexintl.com...