Page 1
® Cybex VR3 Dip/Chin Assist Owner’s and Service Manual Strength Systems Part Number 12231-999-4 C www.cybexinternational.com...
Page 3
Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.
• Securely anchor each machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or better).
SECURING EQUIPMENT: The machine has holes in the feet, which allow for ease in anchoring to the fl oor. Cybex strongly recommends that, to eliminate rocking, tipping or falling over due to incorrect usage and misuse, equipment be secured to a solid, level surface.
Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the maintenance requirements as specifi ed in the manual. STANDARD COMPLIANCE: Cybex products meet or exceed applicable ASTM and EN Standards. Warning/Caution Decals Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Page 10
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual CAUTION Personal injury may occur. Keep away from moving parts to avoid injury. 4000Y316-4 WARNING 1. Exit machine from top step only. Weight stack must be down (not SERIOUS INJURY elevated). COULD OCCUR IF 2.
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities.
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual 2 - Exercise Intended Use MUSCLES USED The intended use of this equipment is to aid or improve general physical fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings prior to using this machine.
Page 14
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Set Up 1. Select desired assist. 2. Select desired grip. 3. Step onto foot bar. NOTE: If assist is not desired, lift foot bar up. Movement 1. Lift/lower body with smooth controlled movements.
Fax orders to 508-533-5183. To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). You may also con- tact us through e-mail at techhelp@cybexintl.com Having the following information ready when calling will assist our Cybex representatives in serving you. •...
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label.
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Damaged Parts Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility of the carrier (UPS, Federal Express, trucking companies, etc.) Apparent Damage - Upon receipt of your shipment, check all items carefully. Any damage seen with a visual check must be noted on the freight bill and signed by the carrier’s agent.
Page 18
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual This page intentionally left blank Customer Service Page 3-4...
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual 4 - Assembly TOOLS REQUIRED • 7/32” Allen wrench • 1/8” Allen wrench • Medium weight automotive engine oil • Torque wrench • 3/4” Wrench • Tape measure NOTE: Two people will be required for this procedure.
Page 20
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Apply loctite to holes of connection plate. Using a 7/32” Allen wrench (supplied in kit) securley tighten all BHSCS securing chin handle in place. If BHSCS securing dip handle were loosened in step 5B then remove one BHSCS, apply loctite to hole in connection plate and BHSCS and then reinstall BHSCS.
Page 21
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual NARROW WIDE bushing bushing edge edge faces upward NOTE: The narrow bushing edge must face downward. Figure 3A Figure 3B 8. Belt Routing. Verify belt is routed through top of pulley bracket and...
Page 22
Securely anchor machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity ( 3/8’’ grade 2 bolts or better).
5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Page 24
Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. CYBEX and its vendors can- not be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
Page 25
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual • Don’t apply cleaners in direct sunlight or at elevated temperatures. • Don’t use scrapers, squeegees or razors. • Don’t clean with gasoline. Compatible Cleaners and Detergents: • Formula 409 • Top Job •...
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all belts (entire length) for any non-uniformity and wear. Immediately replace belt if any of the following conditions are present:...
Page 27
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual 3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and attachment points.
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Environment Static Electricity - Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object.
Page 30
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual This page intentionally left blank. Maintenance Page 5-8...
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual 6 - Service Please refer to the next several pages for parts lists, exploded-view diagrams and cable and belt routing diagrams. NOTE: All inspections and repairs must be performed by trained ser- vice personnel only.
Page 32
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual This page intentionally left blank Service Page 6-2...
Page 33
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Dip/Chin Assist PRODUCT NO. 12231 (Both Sides) NOTE: See exploded-veiw of step assembly for location of J (serial number decal). DESCRIPTION PART NO. DESCRIPTION PART NO. G. Grip........4605-528 A. Placard Decal ....12231-598 H.
Page 34
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual ITEM PART NO. DESCRIPTION ITEM QTY PART NO. DESCRIPTION 610A-350 END CAP 11040-028 TOP WEIGHT ASSY BS070208 COMPRESSION SPRING 11040-568 CLAMP BLOCK INSERT CM000211 DECAL, PATENT PENDING 11090-210 CLAMP FB030232 BEARING, RADIAL 17 mm EXT RACE...
Page 37
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual UPPER AND LOWER HANDLE ASSEMBLY DETAIL Service Page 6-7...
Page 38
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual FOOT BAR ASSEMBLY DETAIL TORQUE BELT SET SCREWS 300/350 IN/LBS STEP ASSEMBLY DETAIL SEE NON SLIP ASSEMBLY DETAIL SERIAL NUMBER DECAL NON SLIP ASSEMBLY DETAIL 2X .25±.06 .69±.06 ±.06 Service Service Page 6-8...
Page 39
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Heavy Stack Assembly Configuration 12070-021 ITEM PART NO. DESCRIPTION 11040-007 Top Weight Assembly 15 12000-375 Panel, Insert 12000-378 Support 12000-387 Extrusion, Inc Wt Channel 12102-330 Insert, Increment Weight 3900-441 Decal, Cybex HF579000 Panel Fastner, 10-24 U Type HX570412 BHSCS, 10-24 X .50, SS...
Page 40
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual Top Weight Assembly ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 11040-366 Top Weight Assembly, Molded HT562715 Tap SC NO 10 x .750 F Phil 11040-367 Hub, Molded HT582510 Tap SC NO 10 x .375 PN HD...
Page 41
Cybex VR3 12231 Dip/Chin Assist Owner’s Manual DIP/CHIN ASSIST BELT ROUTING DETAIL Belt Length 177 Inches 2" BELT EXTENDED THIS SIDE Service Page 6-11...