CYBEX 8800 Owner's And Service Manual
  1. Manuals
  2. Brands
  3. CYBEX Manuals
  4. Home Gym
  5. 8800
  6. Owner's and service manual

CYBEX 8800 Owner's And Service Manual

Strength systems
Hide thumbs Also See for 8800:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Product Number 8800/8810
Owner's and Service Manual
Strength Systems
Part Number 8800-999-4 E
www.cybexinternational.com

Advertisement

Table of Contents
loading

Related Manuals for CYBEX 8800

Summary of Contents for CYBEX 8800

  • Page 1 Product Number 8800/8810 Owner’s and Service Manual Strength Systems Part Number 8800-999-4 E www.cybexinternational.com...
  • Page 3 Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.

  • Page 5: Table Of Contents

    Table of Contents 1 Safety Safety ......1-1 Safety Guidelines and Practices..Warning/Caution Decals .

  • Page 7: Safety

    • Securely anchor each machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or better).

  • Page 8: Safety Guidelines And Practices

    SECURING EQUIPMENT: The machine has holes in the feet, which allow for ease in anchoring to the fl oor. Cybex strongly recommends that, to eliminate rocking, tipping or falling over due to incorrect usage and misuse, equipment be secured to a solid, level surface.

  • Page 9: Warning/Caution Decals

    Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the maintenance requirements as specifi ed in the manual. STANDARD COMPLIANCE: Cybex products meet or exceed applicable ASTM and EN Standards. Warning/Caution Decals Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
  • Page 10 Cybex Product Number 8800/8810 Owner’s Manual CAUTION Failure to correctly adjust could result in personal injury. Always fully engage the detent pin before use to avoid injury. 8500-025-4 A CAUTION Do not rest body weight on stabilization pad or arm.
  • Page 11 Cybex Product Number 8800/8810 Owner’s Manual 8800/8810 (both sides) (both sides) Description Part No. A. Warning Label....4605-381-4 B. Caution Decal.....8500-025-4 C. Caution Decal.....8800-442-4 Safety Page 1-5...

  • Page 12: Regular Maintenance Activities

    Cybex Product Number 8800/8810 Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in Chapter 5.

  • Page 13: Exercises

    Product Number 8800/8810 Owner’s Manual 2 - Exercise Intended Use The intended use of this equipment is to aid or improve general physical fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings prior to using this machine. See Chapter 1, Safety, in the Owner’s Manual or consult with fl...
  • Page 14 Product Number 8800/8810 Owner’s Manual ARM EXTENSION TRUNK ROTATION SQUAT HIP ABDUCTION HIP ADDUCTION HIP FLEXION-KNEE EXTENSION TRUNK FLEXION HIP EXTENSION-KNEE FLEXION TRUNK EXTENSION Exercise Page 2-2...

  • Page 15: Customer Service

    The system assures that returned materials are properly handled and analyzed. Follow the following procedures carefully. Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label.

  • Page 16: Damaged Parts

    3. Provide the model and serial number of your Cybex equipment. 4. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you a RMA number and will send you an ARS label.

  • Page 17: Assembly

    3. Move to desired location. NOTE: If machine is an 8800 and does not fi t through doorway proceed to step 10. NOTE: If machine is an 8810 and does not fi t through doorway proceed to step 10J- 10P. Proceed to step 13 to install Chin-Up Bar.
  • Page 18 Securely anchor machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs tensil capacity (3/8” grade 2 bolts or better).
  • Page 19 Product Number 8800/8810 Owner’s Manual Repeat steps 6D - 6F for other guide rod. Using a 3/16” pin punch and hammer, carefully remove roll pin securing cable end to top weight connec- tor. See Figure 3. Cable End Top Weight...
  • Page 20 Carefully place shrouds into position. Secure top cap in place with the two BHSCS removed in step 6A. 10. Separate Frame for 8800 (If needed to fi t thru doorway). Remove shipping pallet (refer to step 4). Locate insert plug. See Figure 7.
  • Page 21 Product Number 8800/8810 Owner’s Manual Chin-Up Bar Insert plug Insert plug Figure 7 Remove insert plug to gain access to BHSCS securing Chin-Up Bar. See Figure 7. NOTE: 8810 is not shipped with Chin up bar (attached refer to step 13).
  • Page 22 With an assistant secure Chin-Up Bar in place removed in step 10I. Verify all BHSCS are securely tightened. Insert plugs removed in step 10C for 8800 or from hardware pack for the 8810. 11. Install weight plates, decals, cable routing and, shroud assembly for 8800.

  • Page 23: Maintenance

    5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
  • Page 24 Protect surrounding area/clothing from exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. CYBEX and its vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
  • Page 25 Product Number 8800/8810 Owner’s Manual Compatible Cleaners and Detergents: • Formula 409 • Top Job • • Palmolive • Windex with Ammonia D To Minimize Fine or Hairline Scratches: Mild automotive polish applied and removed with a soft, clean cloth will help fi ll scratches.

  • Page 26: Weekly Procedures

    Product Number 8800/8810 Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all cables for wear or damage and proper tension. When inspecting cables, run fi ngers on the cable, paying particular attention to bends in cable and attachment points.

  • Page 27: Yearly Procedures

    Product Number 8800/8810 Owner’s Manual 3. Inspect bars and handles for wear, paying particular attention to tab area connection points. Replace all worn handles immediately. CAUTION: Replace all worn handles immediately. Do not use if less than 1/8” of material remains to the edge.

  • Page 28: Cable Adjustment

    Product Number 8800/8810 Owner’s Manual Cable Adjustment Three types of cable tension adjustment are used on Cybex Strength Systems: 1. Jam Nut Adjustment - This type uses a jam nut and a tension adjustment nut at the cable cam end as the primary adjustment.

  • Page 29: Environment

    Product Number 8800/8810 Owner’s Manual Environment Humidity and Static Electricity The unit is designed to function normally in an environment with a relative humidity range of 30% to 75%. The unit can be shipped and stored in a relative humidity range of 10% to 90%.
  • Page 30 Product Number 8800/8810 Owner’s Manual This page intentionally left blank. Maintenance Page 5-8...

  • Page 31: Service

    Product Number 8800/8810 Owner’s Manual 6 - Service Please refer to the next several pages for parts lists, exploded-view diagrams and cable routing diagrams. NOTE: All inspections and repairs must be performed by trained service personnel only. Cybex will void warranty if non-Cybex replacement parts are used.
  • Page 32 Product Number 8800/8810 Owner’s Manual This page intentionally left blank. Service Page 6-2...
  • Page 33 Product Number 8800/8810 Owner’s Manual Functional Trainer PRODUCT NO. 8800, 8810 Chin Up Bar for 8810 (Both Sides) (Both Sides) NOTE: See exploded-view diagram for location of F (cable Left Side), G (cable Right Side) and K (serial number decal) DESCRIPTION PART NO.
  • Page 34 Product Number 8800/8810 Owner’s Manual ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 02106 HALF WEIGHT PEG FB050226 BEARING,FLANGE 1.000 ID x 1.25 OD 02203 STRAIGHT HANDLE ASSEMBLY x 1.00 LG 08007 WASHER, NYLON .515 ID x 1.000 FB130212 BUSHING, FLANGE .75 ID x .875 OD x .062 THK...
  • Page 35 Product Number 8800/8810 Owner’s Manual RIGHT FRAME ASSEMBLY DETAIL Qty 10 ADJUSTING HANDLE ASSY RIGHT SIDE DETAIL Service Page 6-5...
  • Page 36 Product Number 8800/8810 Owner’s Manual LEFT FRAME ASSEMBLY DETAIL Qty 10 ADJUSTING HANDLE ASSY LEFT SIDE DETAIL Serial Number Detail Service Page 6-6...
  • Page 37 Product Number 8800/8810 Owner’s Manual HANDLE AND PULLEY ASSEMBLY DETAIL UPPER PULLEY ASSY RIGHT SIDE DETAIL ADJUSTING HANDLE ASSY RIGHT SIDE DETAIL ADJUSTING HANDLE ASSY LEFT SIDE DETAIL UPPER PULLEY ASSY LEFT SIDE DETAIL Service Page 6-7...
  • Page 38 Product Number 8800/8810 Owner’s Manual CABLE ASSEMBLY DETAIL NOTE: LEFT SIDE CABLES WILL ROUTE THE SAME WAY AND SECURE TO 8800-205 CABLE ROUTING (RIGHT SIDE SHOWN) Service Page 6-8...
  • Page 39 Product Number 8800/8810 Owner’s Manual STABILIZATION ARM ASSEMBLY DETAIL 20 61 Service Page 6-9...
  • Page 40 Product Number 8800/8810 Owner’s Manual CROSS TUBE AND CHIN UP BAR DETAIL 8800 CROSS TUBE DETAIL Torque to 1075-1125 in .lbs 8810 CHIN UP BAR DETAIL ( CHIN UP BAR ASSEMBLED IS PART NUMBER 8810-101 ) Service Page 6-10...
  • Page 41 Product Number 8800/8810 Owner’s Manual DECAL PLACEMENT DETAIL Service Page 6-11...
  • Page 44 10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexinternational.com • techhelp@cybexintl.com...

This manual is also suitable for:

8810

Table of Contents