Table of Contents
Advertisement
If
18030 Cannot fit
through doorway
Securely anchor machine to the floor
To maximize stability, equipment must be secured to a solid level surface.
Cybex is not responsible for the actual anchoring of equipment. Consult with a professional
•
contractor.
Use fasteners having a minimum of 500 lbs. tensile capacity (3/8'' grade 2 bolts or better).
•
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
•
frame not in contact with surface using flat washers.
Cybex 18030 Bravo Lift Owner's Manual
Two people will be required for this procedure
Separate frame
1. Remove the eight BHSCS securing the platform to the frame using
a 7/32"Allen wrench and a 9/16" wrench.
2. Move machine to desired location.
3. Reattach frame halves and securely tighten the BHSCS and
locknuts.
Then
BHSCS/
Locknut
Qty 8
14
Advertisement
Table of Contents
