Page 1
® Glute Owner’s and Service Manual Strength Systems Part Number 13170-999-4 C www.cybexinternational.com...
Page 3
Cybex International, Inc. DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.
• Securely anchor each machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2 bolts or better).
SECURING EQUIPMENT: The machine has holes in the feet, which allow for ease in anchoring to the fl oor. Cybex strongly recommends that, to eliminate rocking, tipping or falling over due to incorrect usage and misuse, equipment be secured to a solid, level surface.
Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the maintenance requirements as specifi ed in the manual. STANDARD COMPLIANCE: Cybex products meet or exceed applicable ASTM and EN Standards. Warning/Caution Decals Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Page 10
Cybex VR1 13170 Glute Owner’s Manual CAUTION Personal injury may occur. Keep away from moving parts to avoid injury. 4000Y316-4 4605-381-4 A Safety Page 1-4...
Page 11
Cybex VR1 13170 Glute Owner’s Manual Glute - 13170 (both sides) Description Part No. A. Warning Label....4605-381-4 B. Caution Decal.....4000Y316-4 C. Caution Decal.....8500-025-4 Safety Page 1-5...
Cybex VR1 13170 Glute Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities. The preventative maintenance actions are described in detail in Chapter 5.
Cybex VR1 13170 Glute Owner’s Manual 2 - Exercise MUSCLES USED Intended Use The intended use of this equipment is to aid or improve general physical fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings prior to using this machine.
Page 14
Cybex VR1 13170 Glute Owner’s Manual Set Up 1. Adjust abdominal pad for comfortable support. 2. Rest lower leg and forearms on pads and grasp handles. 3. Place foot of opposite leg against foot bar. Movement 1. Push to rear and upward while maintaining body position.
Fax orders to 508-533-5183. To speak with a customer service representative, call 888-462-9239 (for customers living within the USA) or 508-533-4300 (for customers outside the USA). You may also contact us through e-mail at techhelp@cybexintl.com Having the following information ready when calling will assist our Cybex representatives in serving you. • Unit Serial Number •...
3. Provide the model and serial number of your Cybex equipment. 4. At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you a RMA number and will send you an ARS label.
NOTE: It is important that you perform regular inspection and maintenance activities on your equipment. See the CYBEX VR1 Owner’s Manual for inspection and maintenance activities. If you do not have a CYBEX Owner’s Manual or if you have any questions or concerns, Call Cybex Customer Relations at 888-462-9239.
Page 18
Securely anchor machine to the fl oor using the anchor holes provided in each machine. NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor. NOTE: Use fasteners having a minimum of 500 lbs tensil capacity (3/8” grade 2 bolts or better).
Page 19
Cybex VR1 13170 Glute Owner’s Manual Remove guide rod cap and spring and set aside. Repeat steps 7D - 7F for other guide rod. Using a 3/16” pin punch and hammer, carefully remove roll pin securing cable end to top weight connector.
Page 20
Cybex VR1 13170 Glute Owner’s Manual Repeat steps 8A and 8B for each weight plate. Carefully slide top weight (removed in step 7J) over guide rods. 9. Cable routing. Verify cable is routed through top of pulley bracket and then route cable end to top weight connector.
All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment. NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Page 22
Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. CYBEX and its vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
Page 23
Cybex VR1 13170 Glute Owner’s Manual 4. Guidelines for cleaning front panel: • Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing. • Follow up the application with warm water rinse. • Don’t use abrasives or high alkaline cleaners.
Cybex VR1 13170 Glute Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all cables for wear or damage and proper tension. When inspecting cables, run fi ngers on the cable, paying particular attention to bends in cable and attachment points.
Cybex VR1 13170 Glute Owner’s Manual 3. Inspect bars and handles for wear, paying particular attention to tab area connection points. Replace all worn handles immediately. CAUTION: Replace all worn handles immediately. Do not use if less than 1/8” of material remains to the edge.
Cybex VR1 13170 Glute Owner’s Manual Cable Adjustment Three types of cable tension adjustment are used on Cybex Strength Systems: 1. Jam Nut Adjustment - This type uses a jam nut and a tension adjustment nut at the cable cam end as the primary adjustment.
Cybex VR1 13170 Glute Owner’s Manual Environment Static Electricity - Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object.
Page 28
Cybex VR1 13170 Glute Owner’s Manual This page intentionally left blank. Maintenance Page 5-8...
Cybex VR1 13170 Glute Owner’s Manual 6 - Service Please refer to the next several pages for parts lists, exploded-view diagrams and cable and belt routing diagrams. NOTE: All inspections and repairs must be performed by trained service personnel only.
Page 30
Cybex VR1 13170 Glute Owner’s Manual This page intentionally left blank. Service Page 6-2...
Page 31
Cybex VR1 13170 Glute Owner’s Manual GLUTE PRODUCT NO. 13170 B (both sides) NOTE: See exploded-view diagram for location of E (cable) and I (serial number decal) DESCRIPTION PART NO. DESCRIPTION PART NO. G. Arm/Knee Pad ..... 4800-183 A. Placard Decal ....13170-598 H.