Board Installation
BIOS Recovery
i
All BIOS settings are reset to the default values.
►
Opening the casing as described in the operating manual.
►
Close the jumper RCV (JP23).
►
Close the casing as described in the operating manual.
►
Insert a BIOS Recovery Disk and start the PC.
►
Note the signals issued from the buzzer or loudspeaker. You have successfully restored the
BIOS if you hear continuously fast repeated beeps.
►
Power off your system.
►
Open the casing as described in the operating manual.
►
Remove the jumper RCV (JP23).
►
Close the casing as described in the operating manual.
►
Remove the floppy disk from the drive.
►
Start the PC and invoke BIOS Setup.
►
Select the menu item Reset configuration in the menu Advanced and change the setting to
Yes.
►
Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
24
A26361-D1808-Z120-1-7619, edition 1