Bios Recovery - Recovering System Bios - Fujitsu Siemens Computers D1562 Technical Manual

BIOS Recovery - Recovering System BIOS

BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
Open the casing as described in the operating manual.
Ê
Set the switch for "Restore system BIOS" to ON .
Ê
Close the casing as described in the operating manual.
Ê
Insert a BIOS update floppy disk and start the PC.
Ê
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
Ê
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
Open the casing as described in the operating manual.
Ê
Set the switch for "Restore system BIOS" to OFF .
Ê
Close the casing as described in the operating manual.
Ê
Remove the floppy disk from the drive.
Ê
Start the PC and invoke BIOS Setup .
Ê
Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes .
Ê
Save the change and terminate BIOS Setup .
Ê
The BIOS recovery has now been completed. The system restarts.
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
i
("Drivers & Utilities" CD).
28 - English
A26361-D1562-Z121-1-6319