Display Version - Toshiba Strata CTX Programming Manual

➤
To access programming parameters
)%
1. Press to choose Initialize Level 1 or 2.
+ROG
2. Press twice to initialize.
Choosing Initialize Level 1 without installing a SmartMedia Card deletes all programmed
Important!
data and returns your Strata CTX to factory default settings. All previously programmed
data is lost.
Restoring Data from SmartMedia
When initializing with Level 1 you can restore custom data that was previously programmed and stored on
a SmartMedia card. To do so, follow the steps below.
1. Install a SmartMedia card that contains the Prgdata directory with the
file contains your custom settings and can be created by running Data Backup. See
page 13-103.
2. After installing the SmartMedia card, run System Initialization using Initialize Level 1.
Restoring data from the SmartMedia card may take an hour or more. To verify completion of the restore
process access, the Programming Mode from a telephone and enter your password. If the system enables
you to continue, the data restore process is complete.
During the restore process, the telephone LCD may display date and time data. This does not
Note
necessarily indicate completion of the restore process.

Display Version

This program enables you to view current software versions for the Strata CTX system and installed
options.
• Active – As the name implies, this is the current active software operating the Strata CTX system.
• Standby – This is a software version released prior to the active version. It acts as a backup in the event
problems are experienced by the Active version.
Program Number(s): 901
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Version 01
Number
Active
Version 02
Number
Standby
(CTX670 only).
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
None
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
Display Active side software version and
installed options.
As the name implies, this is the current active
software operating the CTX system.
Display Standby side software version and
installed options.
This is a software version released prior to
the active version. It acts as a backup in the
event problems are experienced by the
Active version.
Telephone Button Programming
900 Series Programs
file. The
default.dat
"Data Backup"
Value LCD Prompt
6~31 digits Installed Version
Installed Version
default.dat
on
13-95