Programming Sub-Parameters - Toshiba Strata CTX Programming Manual

Telephone Button Programming
Telephone Button Overview

Programming Sub-parameters

Some commands enable programming of Sub-parameters to further refine Strata CTX settings. Internet or
Network IP addresses are entered using sub-parameter data. IP addresses are displayed as four three-digit
values, or Octets, separated by "periods" (e.g., 192.168.255.253). Your programming telephone's LCD is
only capable of displaying the IP information three digits, or one Octet, at a time.
For example, selecting
the next Octet (in this example 168) in the IP Address, press the
displays the following Octet (in this example 255).
The following is an example from Program 200,
follows COS DAY1, COS DAY2 and COS NIGHT.
1. At the SELECT PARAM
2. At the
COS DAY1=
6SNU
3. Press
4. At the
COS DAY2=
6SNU
5. Press
6. At the
COS NIGHT=
+ROG
7. Press
8. Press another
...or press
To change one of the sub-parameters, you must proceed through all three sub-parameters before
Note
pressing
value, then press
13-4
)%
in Program 916 displays the first Octet, 192, on the LCD. To view or change
prompt, press
prompt, enter a value from 1~32.
.
prompt, enter a value from 1~32.
.
prompt, enter a value from 1~32.
to submit.
)%QQ
button to program more parameters
+ROG
again to program a new DN.
+ROG
. For example, to change the value of COS DAY1, you must change the COS DAY1
6SNU
twice, and finally, press
6SNU
)% )%
. is broken down into three sub-parameters as
)%
.
+ROG
.
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
6SNU
button. Pressing again,