System Admin Log; Format/Unmount Smartmedia - Toshiba Strata CTX Programming Manual

5. Enter another program number to continue programming or press
mode.
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.

System Admin Log

Use this command to Start/Stop the System Admin Log.
Program Number(s): 907
Prerequisite Program:
Reference:
Access Sequence:
FB Name
Admin Log On/Off
)%
1. Press . To run System Admin Log press
2. To Stop the log, press
+ROG
3. Press twice and wait for the
Note When the CTX 670 stops logging data, it automatically sends data to the SmartMedia card. Run the
Unmount command (Program 908) before removing the SmartMedia card to ensure complete data
transfer.

Format/Unmount SmartMedia

This program enables Administrators to format a SmartMedia card from Strata CTX WinAdmin or the
telephone button pad.
Note Strata CTX WinAdmin cannot view SmartMedia files directly. Additional hardware is required to
view the contents of the SmartMedia card.
Program Number(s): 908
Prerequisite Program:
Reference:
Access Sequence:
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
None
Install SmartMedia card
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG.
FB Summary
01
Enter  or  to Start or Stop Admin Log.
)% 
and press on the dial pad.
352*
= prompt to appear before proceeding.
None
None
Login to programming mode from your telephone button pad:
+ROG ✱ ✱ ✱✱✱.
At the PASSWORD= prompt, Enter your password and press +ROG.
At the PROG= prompt enter  and press +ROG
Telephone Button Programming
+ROG
Value
1:Start
2:Stop
 +ROG
(twice). You are sent to the PROG= prompt.
900 Series Programs
again to exit programming
LCD Prompt
1:START
2:STOP
13-101