System
Day Night Service
106 Day/Night Mode "Type of Day" Mapping Table Assignment
Prerequisite Program:
The Day of the Week schedule defines each day as the type of day the schedule shall follow. These types of
days are called Work Day, Non-work Day, and Holiday. Each day of the week can be classified.
F
IELD
01 Monday
02 Tuesday
03 Wednesday
04 Thursday
05 Friday
06 Saturday
07 Sunday
113 Day/Night Mode Daily Schedule Assignment
Prerequisite Program:
The Day/Night Mode daily schedule defines the times for the start of the Work Day, Non-work Day, and
Holiday for each of the modes (Day, Day2. Night). Each "type of day" defined in
"Type of Day" Mapping Table Assignment"
Night Mode Record Sheet"
Note
The start time for Day 1 mode equals the end time for Night mode.
F
IELD
Work Day
•
01 Day 1 Mode
•
02 Day2 Mode
•
03 Night Mode
Non-Work Day
•
04 Day 1 Mode
•
05 Day2 Mode
•
06 Night Mode
Holiday
•
07 Day 1 Mode
•
08 Day2 Mode
•
09 Night Mode
4-20
113
on page 4-20
D
ESCRIPTION
Assign the type of day schedule that is to be used for each day of the week.
Possible values: Work Day (default), Non-work Day or Holiday
Assign the type of day schedule that is to be used for each day of the weekend.
Possible values: Work Day, Non-work Day (default) or Holiday
None
on
on
page
D-8.
D
ESCRIPTION
Enter the Day1, Day2 and Night Mode start time for Work Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note
9999 deletes or skip modes.
Enter the Day1, Day2 and Night Mode start times for Non-Work Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note
Enter 9999 deletes or skip modes.
Enter the Day1, Day2 and Night Mode start times for Holiday Day day type.
Possible values: hhmm; hh = hour (00~23, 99), mm = minutes (00~59, 99)
(default = 9999)
Note
9999 deletes or skip modes.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
page 4-20
requires an assigned schedule. Complete
"106 Day/Night Mode
"Day/