DirecTV L12 User Manual page 34

Getting Started
22
Chapter 1
Programming "TV INPUT"
To set the remote control to choose another source for the signal (such as a DVD or VCR)
follow these steps:
1. Slide the mode switch to DIRECTV.
2. Press and hold SELECT + MUTE for a few seconds until the LED blinks twice.
3. Enter 960. The LED blinks twice.
Resetting the Remote Control (for reference only)
To reset all functions of the remote control to the factory defaults, follow these steps:
1. Slide the mode switch to TV.
2. Press and hold SELECT + MUTE for a few seconds until the LED blinks twice.
3. Enter 981. The LED blinks twice.