Setting The Rev Indicator; Changing The Rev Indicator Settings - Subaru Vehicle Owner's Manual

2-2. Instrument cluster

Setting the REV indicator

■

Changing the REV indicator settings

The engine speed at which the REV indicator turns on at and
whether a buzzer sounds or not when the light turns on can be set.
Engine speed setting range: From 2000 to 7400 rpm (r/min)
Press the "DISP" switch repeatedly until the setting screen is
STEP 1
displayed. (→P. 195)
STEP 2
STEP 3
Press the "DISP" switch.
STEP 4
A buzzer sounds once, and setting of the engine speed value is
complete.
196
Press and hold the "DISP"
switch.
"REV." and the thousandth place
flash. After flashing, the number
changes each time the button is
pressed and held.
Press the "DISP" switch.
The hundredth place flashes.
After flashing,
changes each time the button is
pressed and held.
the number