Installing Child Restraints Using A Seatbelt - Subaru Vehicle Owner's Manual

Installing child restraints using a seatbelt (child restraint lock
function belt)
Rear facing  Infant seat/convertible seat
■
STEP 1
STEP 2
STEP 3
1-7. Safety information
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seatbelt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt
and allow it to retract to put it in
lock mode. In lock mode, the belt
cannot be extended.
1
139