Engine (Ignition) Switch (Vehicles With A Keyless Access With Push Button Start System) - Subaru Vehicle Owner's Manual

2-1. Driving procedures

Engine (ignition) switch (vehicles with a keyless access with push button start system)

Performing the following operations when carrying the access key
on your person starts the engine or changes push-button ignition
switch modes.
■
Starting the engine
Vehicles with an automatic transmission
Check that the parking brake is set.
STEP 1
Check that the select lever is set in P.
STEP 2
If the select lever is not set in P, the engine may not be started.
(→P. 171)
Firmly depress the brake pedal.
STEP 3
The keyless access with push button start system indicator light
(green) will turn on. If the indicator light does not turn on, the
engine cannot be started.
STEP 4
Press the push-button ignition
switch.
The engine will crank until it
starts or for up to 10 seconds,
whichever is less.
Continue depressing the brake
pedal until the engine is com-
pletely started.
The engine can be started
from any push-button ignition
switch mode.
2
159