Changing Push-Button Ignition Switch Mode - Subaru Vehicle Owner's Manual

2-1. Driving procedures
■

Changing push-button ignition switch mode

Modes can be changed by pressing the push-button ignition switch
with the brake pedal (vehicles with an automatic transmission) or
clutch pedal (vehicles with a manual transmission) released. (The
mode changes each time the switch is pressed.)
162
Off*
The hazard warning flashers
can be used.
The keyless access with push
button start system indicator
light (green) is off.
"ACC" mode
Some electrical components
such as the power outlet can
be used.
The keyless access with push
button start system indicator
light (green) flashes slowly.
"ON" mode
All electrical components can
be used.
The keyless access with push
button start system indicator
light (green) flashes slowly.
*: Vehicles with an automatic
transmission: If the select lever
is in a position other than P
when turning off the engine, the
push-button ignition switch will
be turned to "ACC" mode, not
to off.