Following Distance Setting Indicator; Set Vehicle Speed Display; Lane Indicator - Subaru 2016 Outback Owner's Manual

■ Following distance setting indicator

Indicates the following distance setting that was set with the
setting) switch.
⇒
Refer to page 45.

■ Set vehicle speed display

Displays the set vehicle speed.
⇒ Refer to pages 38 and 76.
■ Your vehicle indicator
When the brake pedal is depressed or the brake control function is active, the brake light on
the indicator illuminates in red.
■ Lane keep Assist indicator
• This indicator illuminates when Lane Keep Assist is turned on by pressing the
Keep Assist) switch.
• While the Lane Keep Assist system is activated, if the vehicle travels across a lane
marker the indicator turns from white to green.
⇒
Refer to pages 54 and 58.
■ Selector indicator/shift position indicator
This indicator illuminates and shows which position the selector lever or the gear is in.

■ Lane indicator

• When Lane Keep Assist is in the standby status or is operating, the lane indicator of the
detected lane will illuminate (left, right or both left and right).
• Either the left or right indicator blinks depending on which side your vehicle is drifting
towards when Lane Departure Warning operates.
• The left and right indicators alternately blink when Lane Sway Warning operates.
⇒
Refer to pages 68 and 71.
■ EyeSight warning indicator (yellow)
• This indicator illuminates or flashes when a malfunction occurs in the EyeSight system.
• When it is illuminated or flashing, none of the EyeSight functions can be used (including
Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
⇒
Refer to page 86.
About EyeSight
/ (Following distance
(Lane
15