Bottom Panel; Power Led - D-Link DCS-2000 Manual

Connections (continued)
I/O Connector
There are two I/O connectors,one for input and one for output situated on the
rear panel. The I/O connectors provide the physical interface to send and receive
digital signals to a variety of external alarm devices. Please refer to the
appendix in this manual for detailed information.

Bottom Panel

Socket for stand
Connecting to the Camera Stand
Located on the bottom panel of the Internet Camera, the socket is used to
connect the camera stand onto the Internet Camera by attaching the screw
head on the camera stand into the Internet Camera.

Power LED

LED stands for Light-Emitting Diode.
The Power LED is positioned on the right side of the Internet Camera lens. As
soon as the power adapter is connected to the Internet camera the power
LED will flash red and green several times. The Internet camera is conducting
a quick self-test while the LED flashes. Upon passing the self-test the LED
will turn green to indicate a good connection to an Ethernet port or red to
indicate no connection has been made.
8