D-Link DCS-2000 Manual page 73

Playback Program
Installation of the Surveillance Software is detailed in an earlier section
of this manual titled Installation of the Surveillance Software under
the main section titled Software Installation.
Logging -in
Before you start the Playback software program, it is necessary to Log-in. For
security reasons, only the root account can log-in to Playback. To change the
password of the root account pleaserefer to the section of this manual titled
Logging-In in the main section Using the Surveillance Software.
Upon completion of the installation of the Surveillance Software, you can run
the Monitor program from:
Start\ Program Files\D-Link\Surveillance System Software\Playback
or the directory you specified during the installation.
Status Area
Status Area
The main window will be shown on the top of the screen and the display resolution will
change to 1024x768 automatically. There are four main areas in the the window: Display
area, Histogram area, Control area, and Status area. There are also three controls
the Area selection indictor, the Frame selection indictor, and the Pull bar.
Explanatrions of the main Playback screen follow:
Display Area.
Histogram Area
73
Area Selection Indicator
Control Area.
Pull Bar Area.