D-Link DCS-2000 Manual page 47

Changing the Camera Order in the List
You can drag and drop the gray area (fixed area) of the camera list grid to
change the arrangement of cameras. This makes it easy to rearrange the
cameras.
Move mouse where you want to move and release the mouse button.
Here Video 1 will be moved to the 10th row.
Motion Window and Alert Settings
Show Window Options –
DCS-2000 camera, each motion window can be turned on in "Show
Window Options". Once the motion window is turned on, it will be shown
as a green rectangle in monitoring screen. If you just want to see the
motion window when alerted, you can also turn on the alert window
separately. The alert window will be shown in red rectangle when an alert
occurs.
Alert Settings –
an alert sound or starting recording when motion is detected or a digital
input is triggered. The digital input can be high-triggered or low-triggered.
It depends on your setting. You can also specify the period to record after
the alert-trigger.
Press left mouse
button in gray area.
Move mouse to where you want to move and release
mouse button. Here video 1 will be moved to the 10th row
If Motion Detection is enabled for the selected
Some special actions can be performed, such as generating
47