D-Link DCS-2000 Manual page 12

Enter the information needed by the
Intrnet Camera to connect with your
network or Internet connection. Enter
your IP Address, Subnet Mask,
Gateway and at least 1 DNS ad-
dress. If you do not know what to put
in this fields, please contact your
network System Adminstrator or your
Internet Service Provider.
Click Next
Click the checkbox titled Use this IP whenever systems boots to avoid running this
install application each time you boot up the DCS-2000. Only check this if you are sure
the IP address being entered will not change the next time the DCS-2000 boots up.
If you need to make any changes,
click Back to modify your camera
settings. To accept the settings,
click Restart.
Click Restart
12