D-Link DCS-2000 Manual page 59

If users have configured the Surveillance Software and the DCS-2000
camera, the IP address and location will show the correct setting. Please
note that when users switch between cameras, the changing of the schedule
will be saved automatically.
The Schedule-Record-File operations
There are five related buttons:
Load:
Clear:
Save:
Save As:
Refresh:
Schedule with Time Lines
There are four time-lines: Hour unit time-line, Day unit time-line, Week unit
time-line and Month unit time-line. You can create your schedule in all time-
lines. These four time lines are related to the same database, that is, if you
have rescheduled one time-line, the changes will be applied to the other three
corresponding time-lines.
This operation allows the users load other schedules
from the schedule database for this camera.
This operation will clear all the schedule markers in the
current editing area. Note that users must choose
"save" or "refresh" themselves.
The button is for applying the changes for the current
schedule.
To save the current schedule-record-file to another file
name, this button will perform this.
The scheduling tool will load the old data from the
schedule-record-file. The current changes will be lost.
59