NetVanta 3000 Series Hardware Installation Guide
NetVanta E1/FE1 with G.703 Drop NIM (P/N 1200878L1)
The NetVanta E1/FE1 with G.703 Drop NIM (see Figure 16) provides a single WAN-E1 interface
(2.043 Mbps) with user-selectable TS0 assignment and a G.703 drop port which may be used to drop and
insert traffic to an E1 PBX. Refer to Table A-7 on page 49 for the WAN-E1 pinouts. Refer to Table A-9 on
page 54 for the G.703 pinouts. Refer to Table A-13 on page 56 for the DBU connector pinout. An optional
DIM is required for dial backup applications.
Features and Specifications
Operating Modes
•
E1/FE1
WAN-E1 Interface
•
Connector: RJ-48C
•
Line Rate: 2.048 Mbps +/- 50 PPM
•
Line Code: AMI or HDB3
•
Framing: FAS with optional CRC-4
•
FE1 Line Rate: Channelized Timeslot (in
multiples of 64 kbps)
•
Receiver Sensitivity: -30 dB
G.703 Interface
•
Connector: RJ-48C
•
Line Rate: 2.048 Mbps
•
Line Code: AMI or HDB3
•
Framing: FAS with optional CRC-4
•
Capacity: 1 to 31 timeslots
•
Receiver Sensitivity: -30 dB
Clock Source
•
Network
•
Internal
•
Through
Diagnostics
•
Network loopbacks
61200860L1-34E
WAN-E1
Figure 16. NetVanta E1/FE1 with G.703 Drop NIM
© 2004 ADTRAN, Inc.
G.703
DBU
•
Network performance data (15 minutes
and 24 hours)
•
Test pattern generation and detection:
QRSS, 511
•
Alarm generation and detection through
SNMP
Relevant Requirements/Standards
•
ACIF S016
•
ACA TS001
•
ETSI TBR 12 / TBR 13
•
EMC - see Electromagnetic
Compatibility (EMC) Table on page 6.
•
ITU G.703, ITU-T G.704 (CRC-4), ITU-
T G.823, ITU-T G.797
Environmental
•
Operating temperature: 0 °C to 50 °C
•
Storage Temperature: -40 °C to 85
•
Relative Humidity: Up to 95%
noncondensing
Physical
•
Dimensions: 4.25" x 2.75"
Option Modules
o
C
37