Netvanta E1/Fe1 With G.703 Drop Nim (P/N 1200878L1); Figure 9. Netvanta E1/Fe1 With G.703 Drop Nim; Dbu - ADTRAN NetVanta 4305 Hardware Installation Manual

Hide thumbs Also See for NetVanta 4305:
Table of Contents

Advertisement

NetVanta 4305 Hardware Installation Guide

NetVanta E1/FE1 with G.703 Drop NIM (P/N 1200878L1)

The NetVanta E1/FE1 with G.703 Drop NIM (see Figure 9) provides a single
(2.043 Mbps) with user-selectable TS0 assignment and a G.703 drop port which may be used to drop and
insert traffic to an E1 PBX. Refer to Table A-7 on page 49 for the E1 pinouts. Refer to Table A-7 on page
47 for the G.703 pinouts. Refer to Table A-10 on page 49 for the DBU connector pinout. An optional DIM
is required for dial backup applications.
Features and Specifications
Operating Modes
E1/FE1
WAN-E1 Interface
Connector: RJ-48C
Line Rate: 2.048 Mbps +/- 50 PPM
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
FE1 Line Rate: Channelized Timeslot (in
multiples of 64 kbps)
Receiver Sensitivity: -30 dB
G.703 Interface
Connector: RJ-48C
Line Rate: 2.048 Mbps
Line Code: AMI or HDB3
Framing: FAS with optional CRC-4
Capacity: 1 to 31 timeslots
Receiver Sensitivity: -30 dB
Clock Source
Network
Internal
Through
Diagnostics
Network loopbacks
61200890L1-34B
WAN-E1
G.703

Figure 9. NetVanta E1/FE1 with G.703 Drop NIM

© 2004 ADTRAN, Inc.
WAN-E1

DBU

Network performance data (15 minutes
and 24 hours)
Test pattern generation and detection:
QRSS, 511
Alarm generation and detection through
SNMP
Relevant Requirements/Standards
ACIF S016
ACA TS001
ETSI TBR 12 / TBR 13
EMC - see Electromagnetic
Compatibility (EMC) Table on page 6.
ITU G.703, ITU-T G.704 (CRC-4), ITU-
T G.823, ITU-T G.797
Environmental
Operating temperature: 0
Storage Temperature: -40 to 85
Relative Humidity: Up to 95%
noncondensing
Physical
Dimensions: 4.25" x 2.75"
Option Modules
interface
°
°
to 50
C
o
C
33

Advertisement

Table of Contents
loading

Table of Contents