NetVanta 1335 Series Hardware Installation Guide
NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1)
The NetVanta E1/FE1 + G.703 Drop NIM (see
with user-selectable TS0 assignment, and a G.703 drop port that may be used to drop and insert traffic to an E1
private branch exchange (PBX). Refer to
pinouts. An optional DIM is required for dial backup applications.
Operating Modes
•
Frame Relay, Multilink Frame Relay
•
PPP, Multilink PPP
•
HDLC
WAN-E1 Interface
•
Supported Standards: ITU G.703,
ITU-T G.704 (CRC-4), ITU-T G.823,
ITU-T G.797
•
Line Rate: 2.048 Mbps +50 PPM
•
Line Code: AMI or HDB3
•
Framing: FAS with optional CRC-4
•
FE1 Line Rate: Channelized timeslot (in
multiples of 64 kbps)
•
Receiver Sensitivity: -30 dB
•
Connector: RJ-48C
G.703 Interface
•
Receiver Sensitivity: -30 dB
•
Line Rate: 2.048 Mbps +50 PPM
•
Line Code: AMI or HDB3
•
Framing: FAS with optional CRC-4
•
Capacity: 1 to 31 timeslots
•
Connector: RJ-48C
Clock Source
•
Network
•
Internal
•
Through
61700515E2-34C
Figure
9) provides a single WAN-E1 interface (2.043 Mbps)
Appendix A on page 53
WAN-E1
G.703
Figure 9. NetVanta E1/FE1 + G.703 Drop NIM
Features and Specifications
Copyright © 2011 ADTRAN, Inc.
for WAN-E1, G.703, and DBU connector
DBU
Diagnostics
•
Test Pattern Generation and Detection:
QRSS, 511, all ones, all zeros
•
Network loopbacks
•
Network performance data (15 minutes
and 24 hours)
•
Alarm generation and detection
Compliance
•
EMC - see
Electromagnetic
Compatibility (EMC) Table on page
•
AS/ACIF S016
•
ETSI TBR 12/TBR 13
•
EN 60950
•
IEC 60950
•
AS/NZS 60950
•
RoHS compliant (Telecommunications
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D
Option Modules
6.
27