Setting The Temperature; Statistics Function; Default Values (Reset) - DeLonghi ESAM5400 Instructions For Use Manual

2 or 3 hours.
1. Press the P button to enter the menu;
2. Turn the selection knob until the
mes on;
3. Press the
ction;
4. Turn the selection knob until the lights corre-
sponding to the number of hours before the
appliance goes off automatically:
15 minutes
30 minutes
1 hour
2 hours
3 hours
5. Press the
6. Press the
auto-off is programmed.

Setting the temperature

To modify the temperature (low, medium, high)
of the water used to make the coffee, proceed
as follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until the
mes on;
3. Press the
4. Turn the selection knob until the lights corre-
sponding to the required temperature come
on:
loW
MediuM
high
5. Press the
6. Press the
Setting water hardness
For instructions on setting water hardness, see
page 17.

Statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection knob until the
lights come on;
3. Press the
4. When the selection knob is turned and the
corresponding light flashes, the following
information is displayed:
light co-
button to select the fun-
button to confirm;
button to exit the menu.
light co-
button;
button to confirm;
button to exit the menu.
button;
- how many coffees have been made;
- how many times the machine has been
descaled;
- the total number of litres of water deli-
vered;
5. The quantities are indicated by the flashing
beans as follows:
TENS OF
THOUSANDS THOUSANDS HUNDREDS
example: you want to know how many cof-
fees have been made. enter the menu and
select the

Default values (reset)

This resets all menu settings and programmed
quantities back to the default values (with the
exception of the language which remains as set
previously).
1. Press the P button to enter the menu;
2. Turn the selection knob until until
displayed;
3. Press the
4. Press the
exit.
11
TENS
.
x1 x3 x7
button: OK light flashes;
button to confirm and
UNITS
is