Adjusting The Coffee Mill; Setting The Temperature; Tips For A Hotter Coffee; Making Coffee Using Coffee Beans - DeLonghi Magnifica XS ECAM22110B Manual

The quantity of coffee in the cup has now been programmed�

Adjusting the coffee mill

The coffee mill is preset in the factory to make coffee correctly
and should not require adjusting initially�
However, if after making the first few coffees you find that the
coffee is too thin and not creamy enough or that delivery is too
slow (a drop at a time), this can be corrected by adjusting the
grinding adjustment dial (fig� 13)�
Please note :
The grinding adjustment dial must only be turned when the
coffee mill is in operation�
If the coffee is delivered too slowly or
not at all, turn one click clockwise�
For fuller bodied creamier coffee,
turn one click anticlockwise (do
not turn more than one click at a
time otherwise the coffee could be
delivered a drop at a time)�
These adjustments will only be evident after at least 2 cups of
coffee have been delivered�
If this adjustment does not obtain the desired result, turn the
dial another click�

Setting the temperature

To modify the temperature of the water used to make the
coffee, proceed as follows:
1� With the appliance off and the main switch in the I
position (fig� 3), press the
down until the lights on the control panel come on�
2� Press the
temperature:
LOW
3� Press the
lights go off�

Tips for a hotter coffee

For a hotter coffee, before delivery you are recommended to:
• rinse the appliance through by pressing the
button� Hot water flows out of the coffee spouts and
heats the internal circuit of the machine so that the coffee
delivered will be hotter�
• warm the cups with hot water (using the hot water
function);
button and hold it
button to select the required
button to confirm the selection� The
• set a hotter coffee temperature (see section "Setting the
temperature")�

Making coffee using coffee beans

Important!
Do not use caramelized or candied coffee beans as they could
stick to the coffee mill and damage it�
1� Fill the container with coffee beans (fig� 14)�
2� Place under the coffee spouts:
- 1 cup if you want one coffee (fig� 15);
- 2 cups if you want 2 coffees (fig� 16)�
3� Lower the spouts as near as possible to the cup� This makes
a creamier coffee (fig� 17)�
4� Press the button corresponding to the number of coffees
required
5� Preparation begins and the light corresponding to the
selected button flashes on the control panel�
Once the coffee has been made, the appliance is ready for use
again�
Please note :
• While the coffee maker is making coffee, delivery can be
interrupted at any moment by pressing one of the coffee
buttons�
• At the end of delivery, to increase the quantity of coffee
HIGH in the cup, just press (within 3 seconds) one of the coffee
buttons�
Please note :
For hotter coffee, see the section "Tips for a hotter coffee"�
Important!
• If the coffee is delivered a drop at a time, too thin and
not creamy enough or too cold, read the tips in the
"Troubleshooting" section on page 18�
• Lights may be displayed on the control panel during use�
Their meaning is given in the section "Explanation of the
lights" on page 17�
12
1 espresso 1 long coffee
2 espresso 2 long coffees