PRESET DIAL/BACKSPACE DIALING
This programming option allows you to dial an intercom or an outside phone
number and have the number appear on the display of your Digital Multiline
Display Telephone before the call is placed. This procedure ensures that the
correct number will be dialed.
Operation
To enter and display a number:
Dial the desired number to be called and it will appear on the
display
Press FEAT to erase the digits entered one at a time starting
from the right side of the display.
To make an intercom call:
Lift the receiver and the call will be placed
To make an outside call:
Press an outside line key
Lift the receiver and the call will be placed
PRIME LINE ACCESS
This programming option allows a system extension to immediately access a
specific system extension, outside line, outside line group, hunt group,
paging zone, or optimized routing upon going off hook.
Operation
Lift the receiver
Or
Press the Speaker key SPKR if your station is equipped with a
Speakerphone
PRIVACY/PRIVACY RELEASE
All calls are private and no one may enter a call unless you release the
privacy for that call.
Operation
To release Privacy:
Press the Feature key FEAT then dial
Or
Press the Privacy Release key PRV RLS if assigned as a
Multipurpose key and the lamp will be solid red
You will hear a confirmation tone. To get back to a private call,
repeat the procedure and the lamp will be off.
DIGITAL TELEPHONE USER GUIDE - 232