Caller Id Display Change; Camp-On - Iwatsu ICON Series IX-5910 Owner's Manual

CALLER ID DISPLAY CHANGE

The information displayed on the station LCD during incoming ringing, call
in progress, incoming forwarded call ringing, and camped-on/transferred call
ringing may be changed by pressing a CID DISPLAY CHANGE key. This
feature may be used only incoming calls on Caller ID/ANI or DNIS lines.
Ten different display modes are available. The display mode is determined
by the type of call and status of call.
Operation
During call in progress:
Press the CID DISPLAY CHANGE key

CAMP-ON

Allows you to alert a busy extension user that an outside call is waiting for
them to answer. The busy extension user will hear periodic tone bursts
through the speaker. If they have a display, the display will first indicate the
extension that sent the call followed by CAMP-ON. If the busy extension
does not respond within a specified period of time, the call will return back
to you.
Operation
To Initiate Camp-On:
Press the Transfer key TRAN
Wait for the dial tone
Dial the desired extension number
Hang up
To answer a Camp-On:
Hang up on the first call
Or
Press the Hold key HOLD/DND to place the first call on Hold
Or
Press the Call Park key PARK to place the first call on Call
Park
Answer the second call
DIGITAL TELEPHONE USER GUIDE - 214