Using Boiler Template; Fitting The Boiler Hanging Bracket - Vaillant 824/2 E Instructions For Installation Manual

5 Boiler Installation Sequence

5.2 Using boiler template

Fix the paper template to the wall ensuring that the
correct flue exit point has been identified, ensure that
the template is vertical.
The template shows
- The position of the fixing holes for the boiler
mounting bracket (1).
- The position of the connections.
- The position of the flue exit hole.
- Upper hole (2) indicates top outlet flue with flue
turret facing rearward.
- Lower hole (3) indicates rear outlet flue exiting
directly through wall.
• Mark the position of the hanging bracket fixing holes
(1).
• Drill 2 holes Ø 8 mm for the hanging bracket.
2
5
3
turboMAX only
200/202/240/242/280/282/824/828 Pro/Plus
Fig. 5.3: Using Boiler template
16
Supplied By www.heating spares.co Tel. 0161 620 6677
60/100
5
1
124163
21
Note!
Use alternative fixing holes where necessary.
Identify correct flue exit
Mark the centre of the selected air/flue duct and its
circumference, e.g. by drilling through the template. For
installation of a rear exit outlet please refer to the
installation instructions of the rear exit outlet kit
(Art. No. 303 817).
Other flue options
Flue instructions for other flue systems such as vertical
RSF flues, flues run to the side of the boiler and the use
of additional bends etc. are detailed in the flue
installation instructions provided with the boiler.
Remove the template from the wall and plug the drilled
holes using the wallplugs supplied.

5.3 Fitting the boiler hanging bracket

Fix the hanging bracket (1) to the wall using the screws
supplied (2). (it may be necessary to use additional or
alternative fixings to ensure adequate support).
402
171
1
3
Fig. 5.4: Free space required for installation
Note!
If the boiler is to be fitted in a timber framed
building ensure that the bracket is secured to a
substantial part of the timber frame capable of
taking the weight of the boiler.
Instructions for Installation and Servicing turboMAX plus and thermoCOMPACT R1
174,5
2
1