Use jack 27, LINE OUT, (mono 1/4" jack) to patch out the amp’s signal, Use switch 23 to turn the ATTAX 100 on and off. Make a habit of including all effects, to another power amp or a DI box (for example, ®...
The switching function of the stereo socket FX-ON/OFF on the back of your guitar signal’s bell-like overtones. the ATTAX 100 can be programmed by turning the MOD FX knob and 2.2 CRUNCH holding CLEAN and LEAD pressed down. The following configurations show which effects blocks are assigned in this way to switch 1 and Overdriven sounds à...
‘60s, it also serves up some hip effects that work wonders for 2.4 ULTRA contemporary tunes. Beware! The ATTAX 100’s heart of darkness, this channel offers fierce 3.2 DELAY high-gain sounds of a flavor favored by popular NuMetal bands. This brand of distortion is best described as an angry roar.
LINE Output: Jack type: 1/4" Output impedance: 220 ohms Output level: 6 dBV Max. output level: + 20 dBV External Speaker ATTAX 100: Jack type: 1/4" Circuit: parallel Impedance: 8 to 16 ohms Speakers: (HEAD only) Jack type: Two 1/4"...
Page 6
This is to certify that Für das folgend bezeichnete Erzeugnis HUGHES & KETTNER ATTAX 100™ HUGHES & KETTNER ATTAX 100™ complies with the provisions of the Directive of the Council wird hiermit bestätigt, dass es den wesentlichen of the European Communities on the approximation of...