Xerox 2400 Series User Manual page 71

Scanning
66
Canceling a Configure Before Scan
1. Click Cancel in the scanning progress window.
2. The following window will open asking if you want to cancel the
entire job.
• Yes—Scanning stops and all pages scanned in this batch,
up to this point, will be deleted. The TWAIN interface will
close and you can restart your scan from the beginning.
Choose Yes if the TWAIN scan settings are incorrect for
your current scanning batch.
For instance, the Picture Type is Black & White but you
want to scan your documents in color. Choose Yes to
delete any scanned pages, then start over but select the
correct Picture Type before scanning.
• No—Scanning stops, but all pages scanned in this batch,
up to this point, are not deleted and the TWAIN interface
remains open. You can place a new page on the Flatbed
Glass, adjust the TWAIN settings for it, then click the Scan
button in the TWAIN interface to continue scanning. At the
end of the scanning batch, all pages from the first portion of
the scan and second will be sent to the Destination
Application.
Choose this option if, for instance, you have been scanning
a Black & White document but you want to insert a color
page into it. Instead of having to re-scan the entire stack,
you can stop the current scan, change the Picture Type
from Black & White to Color, then restart the scanning
without losing the pages already scanned.
Xerox Scanner User's Guide