Xerox Scanner User's Guide
The TWAIN Interface opens.
NOTE:
If you are setting up PaperPort for the WIA scanning
option, the WIA interface opens instead.
11. Click the Scan button on the TWAIN interface.
Scanning begins and the Setup Wizard runs the scan test.
Then a window opens that says "Basic scan test passed."
If the scanned image does not appear in the window, click
Missing Image. A window will open for you to retry the scan.
Click Next, then insert the page and click the Scan button on
the TWAIN interface again.
12. Click Next on the "Basic scan test passed" window.
Scanning from the TWAIN Interface
107