Scan With The Scanner Buttons - Xerox 2400 Series User Manual

Scanning

Scan with the Scanner Buttons

22
Pressing a scanner button scans the item, then sends the image to
the Destination Application associated with the button.
To scan by pressing a One Touch button on the scanner:
1. Place an item face down on the glass. Align the edge of the
item with the arrow at the upper-left corner of the glass.
NOTE: Remove any staples or paper clips from documents
before placing them on the glass to avoid scratching it.
2. Close the scanner lid and press one of the One Touch buttons.
A scan progress window opens and the image is sent to the
selected application for the One Touch button. In this example
the Destination Application is the PaperPort desktop.
You can now work with the image in its Destination Application.
For example, if you want to convert a TIFF image in PaperPort
to a PDF image, drag it to the PDF icon at the bottom of the
window. Please see the PaperPort User's Guide for more
information. If you scan to another Destination Application, see
its user guide.
Xerox Scanner User's Guide