Panasonic KX-TG7842C Operating Instructions Manual page 69

5
To complete the transfer:
Press MOFFN.
R The outside call is being routed to the
destination unit.
To establish a conference call:
MMENUN a MbN: "Conf." a MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: "Hold" a
MSELECTN
To resume the conference: MMENUN
a MbN: "Conf." a MSELECTN
R To cancel the conference: MMENUN a
MbN: "Stop conference" a
MSELECTN
You can continue the conversation
with the outside caller.
Base unit
1
During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3
To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Answering a transferred call
Handset
Press M N to answer the page.
TG78xxC(en)_1221_ver013.pdf
Press MZN to answer the page.
69
Intercom/Locator
Base unit
2012/12/21 11:21:32
69