Programming; Programmable Settings - Panasonic KX-TG7842C Operating Instructions Manual

Programmable settings

You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1
MMENUN
2
Press MCN or MDN to select the desired main menu. a MSELECTN
3
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4
Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
n Using the direct command code
1
MMENUN a Enter the desired code.
Example: Press MMENUN#110.
For available code:
– Handset: see page 37.
– Base unit: see page 43.
2
Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
n Handset
Main menu: "Phonebook"
Operation
Viewing the phonebook entry.
Main menu: "Caller list"
Operation
Viewing the caller list.
Main menu: "Answering device"
Sub-menu 1
Play new msg.
(msg.: message)
TG78xxC(en)_1221_ver013.pdf
indicates the reference page number.
Sub-menu 2
–
37

Programming

Code
#280
Code
#213
Settings Code
– #323
2012/12/21 11:21:30
34
52
61
37